Setting up lm sensors: Difference between revisions

From Alpine Linux
No edit summary
(fix wrong removal)
 
(7 intermediate revisions by 5 users not shown)
Line 1: Line 1:
This document is a short note on how to set up lm_sensors in Alpine.
This document is a short note on how to set up lm-sensors in Alpine.


Install the neccessary packages. You will need perl to run the sensors-detect script.
Install the neccessary packages.
  apk_add lm_sensors perl
{{Cmd|# apk add {{pkg|lm-sensors}} {{pkg|lm-sensors-sensord}} {{pkg|lm-sensors-detect}}}}
{{note|If you already know the name of the sensor module, you can modprobe it now, and skip the lm-sensors-detect install.}}


Load the i2c-dev module:
Load the i2c-dev module:
  echo i2c-dev >> /etc/modules
{{Cmd|<nowiki># echo i2c-dev >> /etc/modules-load.d/i2c.conf
  modprobe i2c-dev
# modprobe i2c-dev</nowiki>}}


'''Note:''' If you already know the name of the sensor module, you can modprobe it now, and skip the sensors-detect and perl install. 
Run sensors detect:
{{Cmd|# sensors-detect}}


Run sensors detect:
There are multiple types of sensors that you must skip scanning for (answer <code>no</code> to the prompt) because grsec will not allow you to access {{path|/proc/port}}.  If you encounter an error that says something like <code>/dev/port: no such file..</code>, re-run the script and answer <code>no</code> to that question on the next attempt.  Examples of ones that you must enter <code>no</code> for: ISA bus, other Super I/O sensors, and IPMI.
  sensors-detect


On the question to scan ISA bus and Super I/O sensors, select "no". Grsec will not allow you to access /proc/port. On all other questions select the default.
Be sure to enter <code>yes</code> (non-default) for the question <code>Do you want to generate /etc/conf.d/lm_sensors?</code>


You will not need perl anymore. Remove it before you forget.
You will not need perl anymore. Remove it before you forget.
  apk_delete perl
{{Cmd|# apk del lm-sensors-detect}}
 


Make services start during next reboot.
Make services start during next reboot.
  rc_add -k lm_sensors sensord
{{Cmd|<nowiki># rc-update add lm_sensors default
# rc-update add sensord default</nowiki>}}


Start services:
Start services:
  /etc/init.d/lm_sensors start
{{Cmd|<nowiki># rc-service lm_sensors start
  /etc/init.d/sensord start
# rc-service sensord start</nowiki>}}
 
Don't forget to save your new server configuration using {{Cmd|# lbu commit}}.


Save config using ''lbu commit''.
[[Category:Monitoring]]

Latest revision as of 21:37, 21 September 2023

This document is a short note on how to set up lm-sensors in Alpine.

Install the neccessary packages.

# apk add lm-sensors lm-sensors-sensord lm-sensors-detect

Note: If you already know the name of the sensor module, you can modprobe it now, and skip the lm-sensors-detect install.

Load the i2c-dev module:

# echo i2c-dev >> /etc/modules-load.d/i2c.conf # modprobe i2c-dev

Run sensors detect:

# sensors-detect

There are multiple types of sensors that you must skip scanning for (answer no to the prompt) because grsec will not allow you to access /proc/port. If you encounter an error that says something like /dev/port: no such file.., re-run the script and answer no to that question on the next attempt. Examples of ones that you must enter no for: ISA bus, other Super I/O sensors, and IPMI.

Be sure to enter yes (non-default) for the question Do you want to generate /etc/conf.d/lm_sensors?

You will not need perl anymore. Remove it before you forget.

# apk del lm-sensors-detect

Make services start during next reboot.

# rc-update add lm_sensors default # rc-update add sensord default

Start services:

# rc-service lm_sensors start # rc-service sensord start

Don't forget to save your new server configuration using

# lbu commit

.