LXC: Difference between revisions

From Alpine Linux
(added info on static IPs in Debian since 11.3 Taken from https://www.claudiokuenzler.com/blog/1206/debian-bullseye-11.3-lxc-container-static-ip-config-not-working)
m (fix broken link)
Line 154: Line 154:
{{Cmd|rm /lib/systemd/system/container-getty\@.service}}
{{Cmd|rm /lib/systemd/system/container-getty\@.service}}


You can also [http://without-systemd.org/wiki/index.php/How_to_remove_systemd_from_a_Debian_jessie/sid_installationers remove Systemd from the container]{{dead link}}.
You can also [https://without-systemd.org/wiki/index_php/How_to_remove_systemd_from_a_Debian_jessie/sid_installation/ remove Systemd from the container].


== Starting/Stopping the guest ==
== Starting/Stopping the guest ==

Revision as of 20:45, 3 March 2023

Linux Containers (LXC) provides containers similar to BSD Jails, Linux VServers and Solaris Zones. It gives the impression of virtualization, but shares the kernel and resources with the "host". You can use lxc directly or through LXD.

Installation

Install the required packages:

apk add lxc bridge lxcfs lxc-download xz

If you want to create containers other than Alpine, you'll need lxc-templates:

apk add lxc-templates

Upgrading from 2.x

Starting with Alpine 3.9, we ship LXC version 3.1. LXC 3.x has major changes which can and will break your current setup. LXC 3.x will NOT ship with legacy container templates. Check your current container configs to see if you have any includes pointing to files that don't exist (shipped by legacy templates). For example if you use Alpine containers created with the Alpine template, you'll need to install:

apk add lxc-templates-legacy-alpine

Also make sure you convert your LXC config files to the new 2.x format (this is now required).

lxc-update-config -c /var/lib/lxc/container-name/config

Make sure you have removed cgroup_enable from your cmdline as this will fail to mount cgroups and fail LXC service.

Prepare network on host

Set up a bridge on the host. Example /etc/network/interfaces:

auto br0
iface br0 inet dhcp
    bridge-ports eth0

Create a network configuration template for the guests, /etc/lxc/default.conf:

lxc.net.0.type = veth
lxc.net.0.link = br0
lxc.net.0.flags = up
lxc.net.0.hwaddr = fe:xx:xx:xx:xx:xx

Create a guest

Picking from the list

lxc-create -n guest1 -f /etc/lxc/default.conf -t download

And just pick from the list. lxc-download and xz can be uninstalled after you are done.

Alpine Template

lxc-create -n guest1 -f /etc/lxc/default.conf -t alpine

This will create a /var/lib/lxc/guest1 directory with a config file and a rootfs directory.

Note: by default, the alpine template does not have networking service on, you will need to add it using lxc-console


If running on x64 compatible hardware, it is possible to create a 32bit guest:

lxc-create -n guest1 -f /etc/lxc/default.conf -t alpine -- --arch x86

Debian template

In order to create a debian template container you'll need to install some packages:

apk add debootstrap rsync

You'll need to turn off some grsecurity chroot options otherwise the debootstrap will fail:

echo 0 > /proc/sys/kernel/grsecurity/chroot_caps echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chroot echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mount echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mknod echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chmod


Remember to turn them back on, or simply reboot.

Now you can run:

SUITE=wheezy lxc-create -n guest1 -f /etc/lxc/default.conf -t debian

Setting a static IP

Since Debian Bullseye 11.3 you can't assign a static IP address using the lxc config file of the container because of a systemd change. To make it work with a configuration like the following

# grep net /var/lib/lxc/bullseye/config 
lxc.net.0.type = veth
lxc.net.0.flags = up
lxc.net.0.link = virbr1
lxc.net.0.ipv4.address = 192.168.1.111/24
lxc.net.0.ipv4.gateway = 192.168.1.1


You have to attach to the container and run

lxc-attach -n bullseye systemctl stop systemd-networkd systemctl disable systemd-networkd reboot


After the reboot the IP address should be set correctly. This can be confirmed using the lxc-ls command

# lxc-ls -f NAME STATE AUTOSTART GROUPS IPV4 IPV6 UNPRIVILEGED bullseye RUNNING 1 - 192.168.1.111 - false

Ubuntu template

In order to create an ubuntu template container, you'll need to turn off some grsecurity chroot options:

echo 0 > /proc/sys/kernel/grsecurity/chroot_caps echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chroot echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mount echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_mknod echo 0 > /proc/sys/kernel/grsecurity/chroot_deny_chmod

Remember to turn them back on, or simply reboot.

Now you can run (replace %MIRROR% with the actual hostname, for example: http://us.archive.ubuntu.com/ubuntu/)

lxc-create -n guest2 -f /etc/lxc/default.conf -t ubuntu -- -r xenial -a amd64 -u user --password secretpassword --mirror $MIRROR

Warning: Be sure to set systemd_container to yes in /etc/conf.d/lxc.CONTAINER. Otherwise, most functionality will be broken


Unprivileged LXC images (Alpine / Debian / Ubuntu / Centos etc..)

To enable unprivileged containers, one must create a uidgid map:

echo root:1000000:65536 | tee -a /etc/subuid 
echo root:1000000:65536 | tee -a /etc/subgid

This creates a uid and gid map for the root user starting at 1000000 with a size of 65536.

To configure containers to use this mapping, add the following lines to the configuration:

lxc.idmap = u 0 1000000 65536
lxc.idmap = g 0 1000000 65536

This can be in the global or container-specific configuration.

To create an unprivileged lxc container, you need to use the download template. The download template must be installed:

apk add gnupg xz lxc-download lxc-create -n container-name -t download

choose the Distribution | Release | Architecture.

To be able to log in to a Debian container, you currently need to:

rm /lib/systemd/system/container-getty\@.service

You can also remove Systemd from the container.

Starting/Stopping the guest

First, you should enable the cgroup script:

rc-update add cgroups

If you don't want to reboot, you can start the service by running

rc-service cgroups start

Create a symlink to the /etc/init.d/lxc script for your guest.

ln -s lxc /etc/init.d/lxc.guest1

You can start your guest with:

/etc/init.d/lxc.guest1 start

Stop it with:

/etc/init.d/lxc.guest1 stop

Make it autostart at boot-up with:

rc-update add lxc.guest1

You can add to the container config: lxc.start.auto = 1

rc-update add lxc

to autostart containers with the lxc service only.

Connecting to the guest

By default, sshd is not installed. You'll have to attach to the container or connect to the virtual console. This is done with:

lxc-attach -n guest1

Type exit to detach from the container again (please check the grsec notes above)

Connect to virtual console

lxc-console -n guest1

To disconnect, press Ctrl+a q

Deleting a guest

Make sure the guest is stopped, then run:

lxc-destroy -n guest1

This will erase everything, without asking any questions. It is equivalent to:

rm -r /var/lib/lxc/guest1

Advanced

Creating a LXC container without modifying your network interfaces

The problem with bridging is that the interface you bridge gets replaced with your new bridge interface. Let's say you have interface eth0 that you want to bridge. Your eth0 interface gets replaced with the br0 interface that you create. It also means that the interface you use needs to be placed into promiscuous mode to catch all the traffic that could de destined to the other side of the bridge, which may not be what you want.

The solution is to create a dummy network interface, bridge that, and set up NAT so that traffic out of your bridge interface gets pushed through the interface of your choice.

Let's create that dummy interface (thanks to ncopa for talking me out of macvlan and pointing out the dummy interface kernel module)

modprobe dummy

This will create a dummy interface called dummy0 on your host. To create this interface on every boot, append "dummy" to /etc/modules:

Now we will create a bridge called br0

brctl addbr br0 brctl setfd br0 0

and then make that dummy interface one end of the bridge

brctl addif br0 dummy0

Next, let's give that bridged interface a reason to exist:

ifconfig br0 192.168.1.1 netmask 255.255.255.0 up

Create a file for your container. Let's say /etc/lxc/bridgenat.conf, with the following settings.

lxc.net.0.type = veth
lxc.net.0.flags = up
lxc.net.0.link = br0
lxc.net.0.name = eth1
lxc.net.0.ipv4.address = 192.168.1.2/24 192.168.1.255
lxc.net.0.ipv4.gateway = 192.168.1.1
lxc.net.0.veth.pair = veth-if-0

and build your container with that file:

lxc-create -n alpine -f /etc/lxc/bridgenat.conf -t alpine

You should now be able to ping your container from your host, and your host from your container.

Your container needs to know where to push traffic that isn't within it's subnet. To do so, we tell the container to route through the bridge interface, br0 From inside the container run

route add default gw 192.168.1.1

The next step is to push the traffic coming from your private subnet over br0 out through your internet facing interface, or any interface you chose

We are messing with your IP tables here, so make sure these settings don't conflict with anything you may have already set up.

Say eth0 was your internet facing network interface, and br0 is the name of the bridge you made earlier. We'd do this:

echo 1 > /proc/sys/net/ipv4/ip_forward iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface br0 -j ACCEPT

Now you should be able to route through your bridge interface to the internet facing interface of your host from your container, just like at home!

You could also have a dhcp server running on your host, and set it up to give IP addresses from your private subnet to any container that requests it, and then have one template for multiple alpine LXC containers, perfect for alpine development :)

Using static IP

If you're using static IP, you need to configure this properly on the guest /etc/network/interfaces. To stay in line with the above example, modify /var/lib/lxc/guest1/rootfs/etc/network/interfaces

from

#auto lo
    iface lo inet loopback
auto eth0
    iface eth0 inet dhcp

to

#auto lo
    iface lo inet loopback
auto eth0
    iface eth0 inet static
    address <lxc-container-ip>   # IP which the lxc container should use
    gateway <gateway-ip>         # IP of gateway to use, mostly same as on lxc-host
    netmask <netmask>

mem and swap

vim /boot/extlinux.conf

APPEND initrd=initramfs-3.10.13-1-grsec root=UUID=7cd8789f-5659-40f8-9548-ae8f89c918ab modules=sd-mod,usb-storage,ext4 quiet cgroup_enable=memory swapaccount=1

checkconfig

lxc-checkconfig

Kernel configuration not found at /proc/config.gz; searching... Kernel configuration found at /boot/config-3.10.13-1-grsec --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: missing Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup clone_children flag: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: missing Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: enabled Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/bin/lxc-checkconfig

VirtualBox

In order for the network to work on containers, you need to set "Promiscuous Mode" to "Allow All" in VirtualBox settings for the network adapter.

postgreSQL

Inside the container run:

chmod go+w /dev/null

to fix

rc-service postgresql start

openVPN

see Setting_up_a_OpenVPN_server#openVPN_and_LXC

LXC 1.0 Additional information

Some info regarding new features in LXC 1.0

https://www.stgraber.org/2013/12/20/lxc-1-0-blog-post-series/

See also