Docker: Difference between revisions

From Alpine Linux
(improved docker install instructions. validated and uncommented grsecurity flags with proper description and link to docker-github-issue)
 
(55 intermediate revisions by 29 users not shown)
Line 1: Line 1:
Alpine makes a great docker container, because it is so small and optimized to be run in RAM.
== Installation ==
It might also might make a good controller for several docker containers with enough RAMI haven't tested this yet
 
Docker's setup is easy to use from command lineCommands can be run from an interactive shell, or through a configuration file called a "Dockerfile".  
The {{Pkg|docker}} package is in the ''community'' repository. See [[Repositories]] how to add a repository.
docker.com has excellent walk-throughs on how to run, pull, setup a container, commit an image, and create a configuration file.  hub.docker.com is a freemium setup, where the first private repository is free.
 
  apk add docker
 
Connecting to the Docker daemon through its socket requires you to add yourself to the <code>docker</code> group.
 
  addgroup username docker
 
To start the Docker daemon at boot, see [[OpenRC]].
 
rc-update add docker default
service docker start
 
=== Docker rootless ===
 
Docker rootless allows unprivileged users to run the docker daemon and docker containers in user namespaces. This is not the same as dockremap explained in the section below. With dockremap the daemon still runs as root.


== Installation ==
This requires the {{Pkg|docker-rootless-extras}} package (available in ''community'') and enabling <code>cgroups v2</code>:
edit <code>/etc/rc.conf</code> and set <code>rc_cgroup_mode="unified"</code>. Then start the service on boot:


   
  rc-update add cgroups
Run <code>apk add docker</code> to install Docker on Alpine Linux.


The Docker package is in the 'Community' repository, so if the '''apk add''' fails with '''unsatisfiable constraints''', you need to edit the '''/etc/apk/repositories''' file to add (or uncomment) a line like:
Additionally, the <code>/etc/subuid</code> and <code>/etc/subgid</code> files need to be set up as explained in [https://docs.docker.com/engine/security/rootless/ the official documentation].


<code>http://dl-6.alpinelinux.org/alpine/edge/community</code>
=== Docker Compose ===


{{Pkg|docker-cli-compose}} is in the ''community'' repository starting with Alpine Linux 3.15.


'''To start the Docker daemon at boot, run:'''
apk add docker-cli-compose


<code>rc-update add docker boot</code>
== Isolate containers with a user namespace ==
<pre>
adduser -SDHs /sbin/nologin dockremap
addgroup -S dockremap
echo dockremap:$(cat /etc/passwd|grep dockremap|cut -d: -f3):65536 >> /etc/subuid
echo dockremap:$(cat /etc/passwd|grep dockremap|cut -d: -f4):65536 >> /etc/subgid
</pre>


add to <code>/etc/docker/daemon.json</code>


'''Then to start the Docker daemon manually, run:'''
<pre>
        "userns-remap": "dockremap"
}
</pre>


<code>service docker start</code>
''You may also consider these options : ''
        "experimental": false,
        "live-restore": true,
        "ipv6": false,
        "icc": false,
        "no-new-privileges": false'''''


You'll find all possible configurations [https://docs.docker.com/engine/reference/commandline/dockerd/#daemon-configuration-file here].


{{Note|You'll need to disable some kernel security flags in order to build images:}}
== Example: How to install docker from Arch ==


<code>sysctl -w kernel.grsecurity.chroot_deny_chmod=0</code>
https://wiki.archlinux.org/index.php/Docker


<code>sysctl -w kernel.grsecurity.chroot_deny_mknod=0</code>
== "WARNING: No {swap,memory} limit support" ==


For more information, have a look at the [https://github.com/docker/docker/issues/20303 corresponding Github issue].
You might encounter this message when executing <code>docker info</code>.
To correct this situation, we have to enable the <code>cgroup_enable=memory swapaccount=1</code>


=== Docker Compose ===
==== Alpine 3.8 ====
It may not have been the case before, but with Alpine 3.8, you must configure cgroups properly


'''To install docker-compose, first install pip:'''
{{Warning|This seems ''not'' to work with Alpine 3.9 and Docker 18.06. Follow the instructions for grub or extlinux below instead.}}


<code>apk add py-pip</code>
<pre>echo "cgroup /sys/fs/cgroup cgroup defaults 0 0" >> /etc/fstab</pre>
<pre>
cat >> /etc/cgconfig.conf <<EOF
mount {
cpuacct = /cgroup/cpuacct;
memory = /cgroup/memory;
devices = /cgroup/devices;
freezer = /cgroup/freezer;
net_cls = /cgroup/net_cls;
blkio = /cgroup/blkio;
cpuset = /cgroup/cpuset;
cpu = /cgroup/cpu;
}
EOF
</pre>


=== Grub ===
If you use Grub, add the cgroup condition into <code>/etc/default/grub</code>, then upgrade your grub


'''Then install docker-compose, run:'''
<pre>GRUB_CMDLINE_LINUX_DEFAULT="... cgroup_enable=memory swapaccount=1"</pre>


<code>pip install docker-compose</code>
=== Extlinux ===
With Extlinux, you add the cgroup condition, but inside of <code>/etc/update-extlinux.conf</code>


<pre>default_kernel_opts="... cgroup_enable=memory swapaccount=1"</pre>


== Example: How to install docker from Arch ==
then update the config and reboot


https://wiki.archlinux.org/index.php/Docker
<code>update-extlinux</code>


== How to use docker ==


== '''How to use docker''' ==
Check the [https://docs.docker.com/ official documentation] for details on general usage of docker, including creating and management of containers. Repeating these instructions here be redundant.


The best documentation for how to use Docker and create containers is at the main docker site. Adding anything more to it here would be redundant.
Public images can be browsed at the [https://hub.docker.com/ Docker Hub]. These should also serve as further reference on the Dockerfile format.


'''http://docs.docker.com/'''
Official Docker image files are denoted on the website by a special badge.


if you create an account at docker.com you can browse through other user's images and learn from the syntax in contributor's dockerfiles.
== See also ==
* [https://www.erianna.com/creating-a-alpine-linux-repository/ Creating and Hosting an Alpine Linux Package Repository for Docker Packages]
* [[Running Alpine in a Docker Container]]


Official Docker image files are denoted by a blue ribon on the website.
[[Category:Virtualization]]

Latest revision as of 07:53, 2 December 2023

Installation

The docker package is in the community repository. See Repositories how to add a repository.

apk add docker

Connecting to the Docker daemon through its socket requires you to add yourself to the docker group.

addgroup username docker

To start the Docker daemon at boot, see OpenRC.

rc-update add docker default
service docker start

Docker rootless

Docker rootless allows unprivileged users to run the docker daemon and docker containers in user namespaces. This is not the same as dockremap explained in the section below. With dockremap the daemon still runs as root.

This requires the docker-rootless-extras package (available in community) and enabling cgroups v2: edit /etc/rc.conf and set rc_cgroup_mode="unified". Then start the service on boot:

rc-update add cgroups

Additionally, the /etc/subuid and /etc/subgid files need to be set up as explained in the official documentation.

Docker Compose

docker-cli-compose is in the community repository starting with Alpine Linux 3.15.

apk add docker-cli-compose

Isolate containers with a user namespace

adduser -SDHs /sbin/nologin dockremap
addgroup -S dockremap
echo dockremap:$(cat /etc/passwd|grep dockremap|cut -d: -f3):65536 >> /etc/subuid
echo dockremap:$(cat /etc/passwd|grep dockremap|cut -d: -f4):65536 >> /etc/subgid

add to /etc/docker/daemon.json

{  
        "userns-remap": "dockremap"
}

You may also consider these options :

       "experimental": false,
       "live-restore": true,
       "ipv6": false,
       "icc": false,
       "no-new-privileges": false

You'll find all possible configurations here.

Example: How to install docker from Arch

https://wiki.archlinux.org/index.php/Docker

"WARNING: No {swap,memory} limit support"

You might encounter this message when executing docker info. To correct this situation, we have to enable the cgroup_enable=memory swapaccount=1

Alpine 3.8

It may not have been the case before, but with Alpine 3.8, you must configure cgroups properly

Warning: This seems not to work with Alpine 3.9 and Docker 18.06. Follow the instructions for grub or extlinux below instead.


echo "cgroup /sys/fs/cgroup cgroup defaults 0 0" >> /etc/fstab
cat >> /etc/cgconfig.conf <<EOF
mount {
cpuacct = /cgroup/cpuacct;
memory = /cgroup/memory;
devices = /cgroup/devices;
freezer = /cgroup/freezer;
net_cls = /cgroup/net_cls;
blkio = /cgroup/blkio;
cpuset = /cgroup/cpuset;
cpu = /cgroup/cpu;
}
EOF

Grub

If you use Grub, add the cgroup condition into /etc/default/grub, then upgrade your grub

GRUB_CMDLINE_LINUX_DEFAULT="... cgroup_enable=memory swapaccount=1"

Extlinux

With Extlinux, you add the cgroup condition, but inside of /etc/update-extlinux.conf

default_kernel_opts="... cgroup_enable=memory swapaccount=1"

then update the config and reboot

update-extlinux

How to use docker

Check the official documentation for details on general usage of docker, including creating and management of containers. Repeating these instructions here be redundant.

Public images can be browsed at the Docker Hub. These should also serve as further reference on the Dockerfile format.

Official Docker image files are denoted on the website by a special badge.

See also