View source for Getting started with ACF development

This document describes how to get started with ACF development using the [http://dev.alpinelinux.org/~ncopa/setup-acf-dev setup-acf-dev] script.

It is possible to set up a minimal alpine chroot on your desktop (Ubuntu/Debian/Fedore/Gentoo/whatever) where ACF development can be done. This way its not needed to run a fullblown virtual (or real) machine to do ACF development. While this enviroment will be somewhat limited (no grsecurity or other kernel specific stuff) it still does provide all the necessary stuff to do meaningful ACF development.

There is a small script to set up this environment here: http://dev.alpinelinux.org/~ncopa/setup-acf-dev

The script will:
* Set up a small alpine chroot environment
* Set up a user in the environment with sudo access
* Install needed applications like subversion, http server and vim
* Configure the http server
* Check out ACF modules from svn repository and install them in the environemt
* Create a simple .vimrc with useful key binding
* Create a simple script to enter the chroot

== Invoking the script ==
 $ sudo ./setup-acf-dev 
 usage: setup-acf-dev TARGETDIR

 The following environment variables are used:"

   WGET        path to wget program (/usr/bin/wget)
   TAR         path to tar program (/usr/bin/tar)
   MIRROR      alpine mirror (http://dev.alpinelinux.org/alpine/v1.7)
   BASE        name of alpine base package (base.tar.bz2)
   ACFUSER     non-root username to use in chroot ($SUDO_USER)
   ACFSVN      svn repository base (svn://svn.alpinelinux.org/acf)
   MODULES     svn modules to checkout (core alpine-baselayout)
   CHROOT      chroot program. I.E 'linux32 chroot' (chroot)
   PORT        port for mini_httpd (80)
   http_proxy  proxy server ()

So if you for example use a 64 bit Gentoo desktop you can run the script as:

 CHROOT='linux32 chroot' ./setup-acf-dev acfroot

Then will all chroot invocations be in probper 32 bit mode.

To just set up a chroot in the driectory ''acfroot'' you run the script as:

 $ sudo ./setup-acf-dev acfroot
 >>> Fetching http://dev.alpinelinux.org/alpine/v1.7/base.tar.bz2...
 ./
 ./var/
 ./var/db/
 ./var/db/apk/
 ./var/db/apk/uclibc-0.9.28.3.tar.gz
  
 ...
 
 >>> Creating .vimrc...
 >>> Creating enter-chroot script...
 >>>
 >>> Setup Completed. Enter the chroot environement with (as root):
 >>>
 >>>     acfroot/enter-chroot
 >>>
 >>> Once inside the chroot the privileges will drop to 'ncopa'.
 >>> You can start and stop mini_httpd within chroot by executing:
 >>>
 >>>     sudo /etc/init.d/mini_httpd start
 >>>     sudo /etc/init.d/mini_httpd stop
 >>>
 >>> You can specify the port in /etc/mini_httpd.conf
 >>>
 >>> Remember to install the acf module to activate changes:
 >>>
 >>>     sudo make install
 >>>

== Entering and leaving the ACF chroot ==
The help text will tell you how to enter the chroot. Please note that you need to execute teh enter-chroot script as root. The enter-chrrot script will mount a /proc inside the chroot and it will then change the permissions to the user created by the ''setup-acf-dev'' script

If you installed the ACF environment in teh acfroot directory you enter the chroot byt typing '''sudo acfroot/enter-chroot'''

On my gentoo system it looks like this:
 ncopa@nc ~ $ sudo acfroot/enter-chroot 
 Password:
 Entering ACF develmopment chroot. Type 'exit' or press ctrl-d to leave.
 ~ $ 

== Starting the web server ==
After entering the chroot you can start the webserver with:
 sudo /etc/init.d/mini_httpd start

By default it will bind to port 80. If you need to change the port you can do that by editing ''/etc/mini_httpd.conf''.

Point your web brower to http://localhost and you should see the Alpine webconf.

== Working with the source files ==
After entering the chroot you have the acf modules checked out. Currently there are only 2 modules, alpine-buildroot and core. Enter the module you are interested in, make a change, and run '''sudo make install''' to install the changes. The .vimrc created has a keymap for ''F9'' that will save file and execute ''sudo make install''. So during normal development its jsut to press '''F9''' and refresh the webbrowser to see the changes.

== Adding files ==
If you want to add a file, you need to make the '''Makefile''' aware of your file. If you forget this step the file will not be included in the distribution source package and not in the final apk package. To detect those errors early, always install edited files with make install.

Before committing anything to svn, also make sure that ''make install'' works.

''To be Continued''

= Setting up a acf-dev without chroot =
The following assumes that you already have a functioning Alpine Linux and that you plan to run this on a Alpine Linux
* Install needed packages
 apk_add haserl mini_httpd subversion luaposix json4lua
* Check out the acf-core (and acf-devtools)
 svn co svn://svn.alpinelinux.org/acf/core/trunk /usr/share/acf
 svn co svn://svn.alpinelinux.org/acf/devtools/trunk /usr/share/acf/app/devtools
* Create needed folders and symlinks
 mkdir -p /var/www/localhost/
 ln -s /usr/share/acf/www/ /var/www/localhost/htdocs
* Edit the /etc/mini_httpd.conf
 nochroot
 dir=/var/www/localhost/htdocs
 user=nobody
 logfile=/var/log/mini_httpd.log
 cgipat=cgi-bin**
 port=80
* Edit the /etc/conf.d/mini_httpd
 MINI_HTTPD_OPTS="-C /etc/mini_httpd.conf"
 MINI_HTTPD_DOCROOT=/var/www/localhost/htdocs
* Create/modify /etc/acf/acf.conf
 mkdir /etc/acf/
 echo "appdir=/usr/share/acf/app/
 libdir=/usr/share/acf/lib/
 skin=static" > /etc/acf/acf.conf
* Startup your mini_httpd
 /etc/init.d/mini_httpd start

* Now update your projects
Browse to your ip-address to your acf-dev machine (using firefox or some other web-browser).
Click on "DevTools" > "SVN status (for ACF)" and it helps you download all possible projects.
It should work now!